The way to deal with problems in the use of rubber kneader

When the rubber kneader is back to use the process may encounter some problems, please do not panic, the next will tell you how to deal with these problems.

Here is the table of contents.

•  How to solve the abnormal noise of the rubber kneader?
•  How to solve the pollution problem during the production of rubber kneaders?

How to solve abnormal noise of rubber kneader?

If there is an abnormal noise in the rubber kneader being used, there is a high probability that it is because there is a problem with the mechanical components on the rubber kneader. It may be that the coupling of the pump and motor is not on a centerline, so you need to find the pump and motor coupling back to the center. Or if there is a loose coupling problem, the coupling needs to be reinforced or replaced with a new one. If the rubber kneader anti-vibration device is abnormal, then you need to check the reinforcement, if this does not solve the problem will need to be replaced with new parts, especially to pay attention to the internal mixer. It may also be because the rubber kneader oil supply line valve is blocked by dirt or valve throttling problems, the nozzle is too small is also one of the causes of noise, it is necessary to check and clean the valve, or replace the appropriate components. The choice of hydraulic oil also needs to be carefully selected, hydraulic oil will be too low or low oil temperature, hydraulic oil viscosity caused by the rare difficulties, hydraulic oil is also in the all-time corrosion of internal components, resulting in damage to the internal components of the rubber kneader. Hydraulic oil blistering will also cause the machine to appear noisy. The inspection of the hydraulic oil of the rubber kneader needs to be carried out once in a while, and the hydraulic oil must be chosen carefully.

How to solve the pollution problem during the production of rubber kneaders?

In the rubber kneader mixing process, many reaction processes produce a lot of fumes or toxic volatile gases, the traditional practice is to use exhaust, however, the effect is often less than ideal.

For the above rubber kneader in the feeding and use of the problems encountered, has launched several programs for customers to choose from, the general solution to our first brief introduction:

The fume emission part in the rubber kneader cylinder cover set up a fume collection system, large particles through the bag collection, small particles and exhaust gas. Through a series of filtration systems until the safe discharge to the atmosphere, not only protect our blue sky, but also to optimize our production environment.

Qingdao Huicai Machine Manufacture Co., Ltd is a design, production, sales, and service in one of the technology-based, specialized rubber kneader production enterprises. Good process, good quality, and good service have created the production quality of rubber kneader. Rubber kneader sells well throughout the country and is well received by users.